Foundation Membrane Waterproofing Services in Pakistan
Foundations carry the whole building, yet they sit in damp soil for their entire life. Waterproofing them during construction prevents rising damp, protects steel and concrete, and avoids costly repairs later. Waterproofing Hawks installs foundation membranes and damp proof courses for new homes and buildings.
- Free Inspection
- Written Warranty
- Trained Team
We find the real cause
On every project
Request a Free Quote
Share a few details and our team will contact you shortly to arrange a free inspection.
Request a Free Inspection
What is foundation membrane waterproofing?
Foundation waterproofing protects footings, plinth beams, grade beams and the lower parts of walls from ground moisture. In much of Pakistan, especially on the plains of Punjab and Sindh, groundwater can be shallow and salty. Without protection, moisture rises into walls, leaving damp patches and white shora, and salts attack concrete and steel.
What foundation waterproofing includes
- A membrane or coating on footings and plinth beams before backfilling
- A damp proof course (DPC) at plinth level to stop moisture rising into walls
- A membrane or polythene barrier under ground floor slabs
- Protection of membranes during backfilling
Materials
We use bituminous coatings or sheets, cementitious and crystalline coatings, and HDPE membranes depending on the soil, groundwater level and design. See HDPE membrane and bituminous membrane.
- New houses and boundary walls
- Plazas and multi-storey buildings
- Buildings in high groundwater or saline areas
- Retaining walls and plinths
- Extensions to existing buildings
Benefits
- Prevents rising damp and shora
- Protects steel and concrete from salts
- Low cost during construction compared to later repair
- Drier, healthier ground floor rooms
What Our Customers Say.
We don't just fix leaks — we build trust. Real reviews from homeowners and businesses across Pakistan, straight from our Google Business profile.
Surface preparation: the step that decides how long foundation membrane waterproofing lasts
Every membrane system, however good, depends on the surface it is applied to. Most membrane failures we repair across Pakistan were caused by poor preparation rather than poor material. That is why we treat preparation as the most important part of the job.
Removing what will not hold
Old coatings that are peeling, cracked bitumen, loose screed and wet mud or brick tile layers are removed. Laying a new membrane over failed material only seals water in and leads to blisters and early failure.
Repairing the base
Cracks are opened and filled, honeycombed or weak concrete is repaired with polymer mortar, and any exposed steel is cleaned and treated against rust.
Correcting slopes
Water that stands on a membrane for hours shortens its life. Low spots are filled so water runs freely to the outlets or drains.
Cleaning and drying
Dust, oil and loose particles are removed. Most systems need a dry surface, so we check moisture before applying primer and membrane.
Forming fillets
A rounded fillet is formed where horizontal surfaces meet walls, so the membrane turns the corner smoothly instead of being stretched over a sharp edge.
How we carry out foundation membrane waterproofing
Once the footings and plinth beams have cured, surfaces are cleaned and primed. A bituminous, cementitious or crystalline coating or sheet membrane is applied to all exposed faces of the foundation. At plinth level a continuous damp proof course is formed. The membrane is protected with board or a brick protection wall before backfilling with compacted soil. Under the ground floor slab, a polythene or membrane layer is laid over compacted fill. For existing buildings with rising damp, we offer chemical damp proof injection instead. See dampness and seepage solutions.
Four simple steps to a dry home
A clear, hassle-free process from your first call to the final handover.
Get in Touch
Call, WhatsApp or fill the form and tell us about the problem.
Free Inspection
Our expert visits your site and finds the exact source of the issue.
Clear Quotation
You receive a detailed quote with materials, timeline and warranty.
Work & Handover
We complete the treatment on time and hand over your warranty.
Detailing: where membranes succeed or fail
On any membrane project, the open flat areas are the easy part. The details are where water finds its way in, so we treat them before the main membrane goes down.
- Drains and outlets are reinforced with extra membrane or fabric and lapped into the pipe.
- Pipe penetrations receive collars or liquid membrane details.
- Wall upturns run up parapets and walls, usually 150 to 300 mm, and are terminated securely so water cannot get behind them.
- Expansion joints are bridged with flexible strips that allow the structure to move.
- Corners and edges are reinforced because they take the most stress.
- Tank bases, AC stands and solar frames are wrapped and sealed.
Careful detailing takes time, but it is what makes the difference between a membrane that lasts many years and one that leaks after the first monsoon.
Protecting the membrane after installation
A membrane is only as long-lasting as the protection over it. Sun, foot traffic, dropped tools and later construction work are the main threats. Depending on the area, we use one of these protection methods.
Reflective top coats
On exposed roofs, a white or aluminium coating reflects sunlight, keeps the membrane cooler and shields it from UV. It also reduces the heat entering the rooms below.
Mineral cap sheets
Some sheet membranes come with a factory-applied mineral granule surface that protects them from UV without an extra coating.
Protection screed and tiles
On terraces and roofs that are used regularly, a cement screed and tiles over the membrane give a hard-wearing surface while keeping the membrane safe underneath.
Protection boards
Below ground, on basement walls and foundations, boards protect the membrane from damage during backfilling and from sharp stones and roots.
Why homeowners rely on us
Honest advice, quality materials and clean work — on every single project.
Quality Service
We deliver reliable waterproofing solutions for long-lasting protection.
Skilled Team
Our team focuses on effective foundation membrane waterproofing work and protection.
Quick Response
We respond promptly to your foundation membrane waterproofing service inquiries.
Fair Pricing
We help customers explore suitable waterproofing options within budgets.
Leak Prevention
Our solutions help reduce water penetration and moisture damage.
Roof Protection
We help protect residential and commercial roofs from leakage.
Testing and quality control
We check the work at each stage rather than only at the end. During application we check overlaps on sheet membranes and measure wet film thickness on liquid membranes, so every area receives the specified amount. Before protection layers are added, we carry out a water test wherever practical by plugging drains and ponding the area for 24 to 48 hours, or by spraying walls and details. Only after the area passes do we add the protective finish. This way any small fault is found and fixed while it is easy to reach, not after tiles or screed have been laid over it.
New construction or an existing building?
New construction
The best time to install any membrane is during construction, before finishes are laid. Surfaces are accessible, details can be designed in, and the membrane can be fully protected. We are happy to work with your architect or contractor to plan waterproofing at the design stage, including drainage, upturn heights and protection layers.
Existing buildings
For older buildings, we first assess what is already there. Sometimes a new membrane can be installed over a sound existing surface after cleaning and priming. In other cases, failed layers, wet filling or old bitumen must be removed so the new system bonds properly. We explain the options and the trade-offs in cost, weight and life span, so you can make an informed decision. See old membrane removal and replacement.
Leaking roof or a hot top floor? Let's fix it.
Book a free inspection today. Our expert will visit, find the cause and suggest the right solution.
Pakistan has some of the toughest conditions for waterproofing anywhere. Summer roof temperatures in Punjab and Sindh can damage weak materials within a few seasons. The monsoon brings weeks of heavy rain to Lahore, Islamabad, Sialkot and much of the north-east. Karachi and the coast have salty, humid air that attacks exposed materials, while Quetta, Gilgit and the northern hills face cold winters and snow.
A membrane chosen for one of these conditions may not suit another. In very hot areas we prefer UV-stable, reflective or protected systems. In heavy rain areas we focus on thickness, drainage and detailing. In coastal areas we choose salt and UV-resistant top coats. In cold areas we use membranes that stay flexible at low temperatures. We explain these choices during the inspection so you know why a system is recommended for your building.
Common membrane installation mistakes
- Installing on a wet surface, which leads to blisters and loss of bond
- Skipping the primer, so the membrane does not stick properly
- Narrow or poorly sealed overlaps that open after a few months
- No upturn at walls, letting water run behind the membrane
- Leaving bitumen exposed to the sun without protection
- Ignoring drains and pipes, which are where most leaks start
- No water test before covering the membrane
Our process is designed to avoid each of these mistakes, which is why our membranes deliver the life they are designed for.
Membrane care and maintenance
Membranes need very little care, but a few simple checks extend their life. Clean drains and outlets before the monsoon so water never ponds. Inspect exposed areas after major storms for damage or lifted edges. Refresh reflective top coats every few years. Avoid drilling or fixing anything through the membrane without sealed details, and call us before installing solar panels, dish antennas or new pipes. Small repairs made early are quick and inexpensive. See membrane repair and maintenance.
We install foundation membrane waterproofing for a wide range of clients across Pakistan. For homeowners, we focus on protecting top floor rooms and keeping costs clear and fair. For builders and developers, we work to construction schedules and coordinate with other trades so the membrane is installed and protected at the right stage. For commercial buildings such as plazas, offices, hospitals and schools, we plan work around opening hours and keep disruption low. For factories and warehouses, we cover large areas in phases so operations continue. Whatever the building, every project gets the same careful preparation, detailing and testing.
Our commitment on every membrane project
On every project we arrive on time, explain our findings clearly and give a written quote before starting. We protect your property, keep the site tidy, test our work wherever practical and return after the next rain to make sure everything is dry. If a warranty issue arises, we come back and put it right.
What affects the cost of foundation membrane waterproofing
- Area, including wall upturns, parapets and details
- Condition of the surface and how much repair is needed
- Removal of old layers such as mud, tiles or failed membranes
- Number of details such as drains, pipes and equipment bases
- Protection layer, such as reflective coat, screed or tiles
- Access, including height and material lifting
After a free inspection we provide a written quote listing each item, the membrane thickness or number of layers and the warranty period.
Why choose Waterproofing Hawks for foundation membrane waterproofing
- Experience with all major membrane systems, so we recommend what fits rather than one product
- Thorough surface preparation and detailing
- Quality checks and water testing before finishing
- Trained, safety-conscious applicators
- Clean sites and clear communication
- Written quote and warranty
We work across Pakistan, including Lahore, Islamabad, Rawalpindi, Karachi, Faisalabad, Multan and Peshawar. Call or WhatsApp 0321-4156036 or request a free inspection.
Related services you may need
Water and heat problems rarely come alone. These related services are often done together with foundation membrane waterproofing.
Questions about Foundation Membrane Waterproofing
Answers to the questions customers ask us most about foundation membrane waterproofing.
0321-4156036
When should foundation waterproofing be done?
During construction, after footings and plinth beams cure and before backfilling.
Is a damp proof course necessary?
Yes. It is the main barrier against rising damp in ground floor walls.
Can foundation waterproofing be added to an old house?
External membranes are difficult, but rising damp can be treated with chemical damp proof injection.
What material is best?
It depends on groundwater and soil. Bituminous, crystalline and HDPE systems are all common.
Can membranes be installed in winter?
Yes, in most areas, on dry days. In cold northern areas we avoid freezing conditions.
Do membranes add weight to the roof?
Very little. Most membranes are much lighter than traditional mud and tile layers.
Do you provide a written warranty?
Yes. Complete systems come with a written warranty. The period depends on the system and is stated clearly in your quote.
How do I get a quote?
Call or WhatsApp 0321-4156036 or fill in the quote form on this page. We arrange a free inspection, then send a written quote with the scope, materials, timeline and warranty.
Can you work while we live in the building?
Yes. We plan work in stages, keep the site clean and safe, and agree working hours with you so daily life and business can continue with minimal disruption.
Which cities do you work in?
We work across Pakistan, including Lahore, Islamabad, Rawalpindi, Karachi, Faisalabad, Multan, Peshawar and many other cities. Call 0321-4156036 to check your area.
Latest tips & guides
Practical advice to help you protect your home from leakage and heat.